How to repair automatic umbrellas?

- May 19, 2019-


Nowadays, umbrellas on the umbrella wholesale market, especially parasols, advertising sun umbrellas, advertising umbrellas, etc., have been pursuing practicality and fashion, and have become the decorations of people, especially for women. But it is easy to break down. It’s a small problem. It’s a pity to throw it away. Here are a few tips for how to repair an umbrella.

 

1. The umbrella and the rod are separated.

When the umbrella is automatically opened, the fixing pin is broken due to the force of the spring, and the umbrella and the rod are separated.

 

Repair method:

- Replace the T-type pin and replace it with the flat pin. When loading the pin, firstly align the orientation of the upper umbrella bar, put the pin on the round hole of the two handles, push the umbrella rod to make it pass over the inner stalk, and then restore the inner stalk. Put the umbrella on, press the button, the umbrella can be opened in sections, and it is automatically blocked. Repeated several times and no longer separated, they will be repaired.

 

- Use a wire with a diameter of one millimeter, refer to the original, fold and bend into a T-shaped pin, or substitute. Pay attention to the corners to be clamped. The entire pin must not exceed the “1” shape rod groove, otherwise there will be resistance when opening the umbrella. Exceeding parts use small file to level, the installation method is the same as above.

 

2. The round hole of fixing the pin slide, made the pin and the umbrella derail out.

In the event of such a fault, the T-pin is generally complete and still available.

Repair method: Add a thin copper piece at the entrance of the round hole, firmly solder it with tin, then use the file tool to repair the groove, insert the T-shaped pin into the round hole, and put it back, and try it several times without error.

 

3. The bulge slip.

The groove of the automatic switch control can not be fixed after the umbrella is closed, and the umbrella is often automatically opened.

Repair method: In the middle of the bulge, use a knife to open a gap. It can stop the automatic umbrella from opening when the umbrella is closed. It can be automatically opened when the umbrella is opened. You can use file tool to determine whether the gap is small or large.